Skip to content

Loraine Fire and EMS Frequencies

Loraine in Mitchell County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 44 miles away.

About Loraine Fire and EMS Frequencies

Quick answer: Fire dispatch for Loraine: Loraine Fire 154.4150 MHz, FM, 103.5 PL. County-level ems dispatch that covers Loraine: Mitchell County EMS 155.4000 MHz, P25, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Loraine conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Loraine
AgencyDescriptionFrequency (MHz)ToneModeFCC
Loraine FireLoraine Fire – Dispatch154.4150
In 153.8300
103.5 PLFMWPKV570

Mitchell County channels that also cover Loraine

Fire Dispatch

Fire Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County FireFire Primary154.4000
In 153.7700
173.8 PLFMWNNG895

EMS Dispatch

EMS Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County EMSEMS Primary155.4000
In 150.7900
P25WPFD873

Nearest trunked radio sites

Distances are measured from the center of Loraine.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 44 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 47 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Site 10 · San Angelo (P25)
Project 25 · RFSS 0 · Site 10 (hex A) · NAC 014 · about 67 mi away
Control 854.9625, 855.2125, 855.7375, 855.9875, 857.4625, 858.4625, 859.4625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Loraine?

Fire dispatch channels listed for Loraine: Loraine Fire 154.4150 MHz, FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Loraine?

We do not have a EMS dispatch channel listed specifically for Loraine. The county-level EMS dispatch channels in the same county: Mitchell County EMS 155.4000 MHz, P25, no tone.

What scanner do I need to listen to fire and EMS in Loraine?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Loraine?

For Loraine, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Loraine fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Loraine are marked encrypted.