About Loraine Police Frequencies
Quick answer: County-level dispatch that covers Loraine: Mitchell County Sheriff 155.5800 MHz, P25, NAC 168.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Mitchell County channels that also cover Loraine
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Sheriff | Mitchell County Sheriff – Dispatch (P25) | 155.5800 In 154.8900 | NAC 168 | P25 | KVF667 |
| Mitchell County Sheriff | Sheriff/Police Primary | 155.5800 In 154.8900 | 94.8 PL | FM | KVF667 |
Nearest trunked radio sites
Distances are measured from the center of Loraine.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Loraine?
We do not have a dispatch channel listed specifically for Loraine. The county sheriff's dispatch channels in the same county: Mitchell County Sheriff 155.5800 MHz, P25, NAC 168.
What scanner do I need to listen to police in Loraine?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Loraine?
For Loraine, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.