Skip to content

Scanner Guides

How scanners, trunked systems and police, fire, airport and railroad radio work, in plain English.

Short, plain-English explanations of the things the frequency tables only list: how trunked systems work, what the codes mean, and how to set up your scanner.

What Do RFSS, Site, NAC and Talkgroup Mean?

On a Project 25 trunked radio system, the site is one tower location, the RFSS is a group of sites, the NAC is a code the site transmits, and a talkgroup is a virtual channel. You program the control channels first and then pick talkgroups.

Updated

What Do RFSS, Site, NAC and Talkgroup Mean?

On a Project 25 trunked radio system, the site is one tower location, the RFSS is a group of sites, the NAC is a code the site transmits, and a talkgroup is a virtual channel. You program the control channels first and then pick talkgroups.

Updated

CTAF and UNICOM: Radio at Airports Without a Tower

At an airport without a control tower, pilots announce where they are on a shared frequency called the CTAF, and a UNICOM operator, if there is one, answers questions about fuel and services. Both are usually between 122.7 and 123.075 MHz.

Updated

What Is ATIS? The Recorded Airport Weather Broadcast

ATIS is a recorded message, repeated continuously on its own frequency, that gives pilots the current weather, the runways in use and any notices, with each update identified by a letter so pilots know they have the latest.

Updated

PL, DPL, NAC, RAN and CSQ: What the Tone Codes Mean

PL and DPL are quiet tones sent under the voice so a radio can ignore other users. NAC, RAN and color code do the same job for digital systems, and CSQ means no code at all. You can leave them off to hear everything on the frequency.

Updated

How Fire and EMS Paging Works: Tone-Outs Explained

A tone-out is a short burst of audible tones that alerts one fire department or ambulance crew, followed by a voice message. Volunteer departments rely on them, so the channel is silent until a call. Most scanners play the tones as beeps and cannot pick out one department's tones.

Updated

Fire Mutual Aid and Interoperability Channels Explained

A mutual aid or interoperability channel is a shared channel that lets crews from different departments or agencies talk to each other at a large incident. Some are national, some are set by the state or region, and many are left unencrypted for that reason.

Updated

Encrypted Fire and EMS Radio: What the Enc Badge Means

An Enc badge means the audio is scrambled so only radios with the right key can understand it. A scanner receives the signal but can't turn it into speech, so encrypted channels are listed for completeness and can't be monitored.

Updated

Encrypted Police Radio: What the Enc Badge Means

An Enc badge means the audio is scrambled so only radios with the right key can understand it. A scanner receives the signal but can't turn it into speech, so encrypted channels are listed for completeness and can't be monitored.

Updated

Why Is My Fire Scanner Channel Quiet? (It Usually Isn't Broken)

A quiet fire channel is usually normal. Volunteer departments are paged by tones and only use the radio during calls, fireground channels are silent until an incident, and a small department may have only a few calls a week. Check the listing's status badge and your settings before assuming it is broken.

Updated

Which Scanner Do I Need for Railroad Radio?

Any scanner that covers the VHF high band (about 136 to 174 MHz) and narrowband FM can receive most railroad channels. A digital decoder is needed only for NXDN, DMR or P25 channels.

Updated

Why a Fire or EMS Frequency Stopped Working

The usual reasons are that the department moved to a trunked or digital system, encrypted the channel, kept the frequency only as a backup, or your scanner settings no longer match. Check the listing's status badge first.

Updated

Why a Police Frequency Stopped Working

The usual reasons are that the agency moved to a trunked or digital system, encrypted the channel, kept the frequency only as a backup, or your scanner settings no longer match. Check the listing's status badge first.

Updated