Skip to content

Snyder Fire and EMS Frequencies

Snyder in Scurry County, Texas has 4 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 45 miles away.

About Snyder Fire and EMS Frequencies

Quick answer: Fire dispatch for Snyder: Snyder Fire 154.3550 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Snyder: Scurry County EMS 155.9100 MHz, FM, 94.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Snyder conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Snyder
AgencyDescriptionFrequency (MHz)ToneModeFCC
Snyder FireSnyder Fire – Dispatch154.3550
In 153.9500
151.4 PLFMNKKV620

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Snyder
AgencyDescriptionFrequency (MHz)ToneModeFCC
Snyder FireSnyder Fire – Fire Ground154.4300FMNKNGH970
Snyder FireFire Administration154.540094.8 PLFMNWPIX830

Fire Talk-around

Fire Talk-around frequencies for Snyder
AgencyDescriptionFrequency (MHz)ToneModeFCC
Snyder FireSnyder Fire – Dispatch (P25)154.3550
In 153.9500
NAC 208P25KKV620

Scurry County channels that also cover Snyder

EMS Dispatch

EMS Dispatch frequencies for Scurry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Scurry County EMSScurry County EMS – Dispatch155.9100
In 153.9950
94.8 PLFMWQIA431

EMS Tactical

EMS Tactical frequencies for Scurry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cogdell Memorial HospitalScurry Co. EMS Patient Reports155.340094.8 PLFM—

Hospitals & Medical

Hospitals & Medical frequencies for Scurry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cogdell Memorial HospitalCogdell Memorial Hospital Operations155.8575
In 154.2275
FMWQIM384

Nearest trunked radio sites

Distances are measured from the center of Snyder.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 45 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 49 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Ransom Canyon · Lubbock City-County Mutual Radio System
RFSS 4 · Site 4 (hex 4) · NAC E · about 72 mi away
Control 856.2375, 857.2375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Snyder?

Fire dispatch channels listed for Snyder: Snyder Fire 154.3550 MHz, narrow FM, 151.4 PL.

What frequency does EMS or the ambulance service use in Snyder?

We do not have a EMS dispatch channel listed specifically for Snyder. The county-level EMS dispatch channels in the same county: Scurry County EMS 155.9100 MHz, FM, 94.8 PL.

What scanner do I need to listen to fire and EMS in Snyder?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Snyder?

For Snyder, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Snyder fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Snyder are marked encrypted.