Skip to content

Roscoe Fire and EMS Frequencies

Roscoe in Nolan County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 54 miles away.

About Roscoe Fire and EMS Frequencies

Quick answer: Fire dispatch for Roscoe: Roscoe Fire 155.0400 MHz, narrow FM, 94.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Roscoe conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Roscoe
AgencyDescriptionFrequency (MHz)ToneModeFCC
Roscoe FireRoscoe Fire – Dispatch155.0400
In 158.8800
94.8 PLFMNWNXX332
Roscoe FireDispatch, Police Tactical155.0400
In 158.8800
NAC 177P25 EncryptedWNXX332

Nearest trunked radio sites

Distances are measured from the center of Roscoe.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 54 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 57 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Site 10 · San Angelo (P25)
Project 25 · RFSS 0 · Site 10 (hex A) · NAC 014 · about 68 mi away
Control 854.9625, 855.2125, 855.7375, 855.9875, 857.4625, 858.4625, 859.4625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Roscoe?

Fire dispatch channels listed for Roscoe: Roscoe Fire 155.0400 MHz, narrow FM, 94.8 PL.

What scanner do I need to listen to fire and EMS in Roscoe?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Roscoe?

For Roscoe, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Roscoe fire and EMS frequencies encrypted?

1 of the 2 conventional frequencies listed for Roscoe are marked encrypted; a scanner cannot decode encrypted audio.