Skip to content

Westbrook Fire and EMS Frequencies

We do not have frequencies listed specifically for Westbrook in Mitchell County, Texas yet. Countywide channels for Mitchell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 26 miles away.

About Westbrook Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Westbrook: Mitchell County Fire 154.4000 MHz, FM, 173.8 PL. County-level ems dispatch that covers Westbrook: Mitchell County EMS 155.4000 MHz, P25, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Mitchell County channels that also cover Westbrook

Fire Dispatch

Fire Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County FireFire Primary154.4000
In 153.7700
173.8 PLFMWNNG895

EMS Dispatch

EMS Dispatch frequencies for Mitchell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mitchell County EMSEMS Primary155.4000
In 150.7900
P25WPFD873

Nearest trunked radio sites

Distances are measured from the center of Westbrook.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 26 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 29 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Midland VHF · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 90 (hex 5A) · NAC 130 · about 64 mi away
Control 151.2875, 151.4525
Voice 151.1675, 154.1675, 154.3325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Westbrook?

We do not have a fire dispatch channel listed specifically for Westbrook. The county-level fire dispatch channels in the same county: Mitchell County Fire 154.4000 MHz, FM, 173.8 PL.

What frequency does EMS or the ambulance service use in Westbrook?

We do not have a EMS dispatch channel listed specifically for Westbrook. The county-level EMS dispatch channels in the same county: Mitchell County EMS 155.4000 MHz, P25, no tone.

What scanner do I need to listen to fire and EMS in Westbrook?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Westbrook?

For Westbrook, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.