Skip to content

Roby Fire and EMS Frequencies

We do not have frequencies listed specifically for Roby in Fisher County, Texas yet. Countywide channels for Fisher County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 71 miles away.

About Roby Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Roby: Fisher County Fire 154.2500 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Roby: Fisher County EMS 155.7750 MHz, narrow FM, 110.9 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Fisher County channels that also cover Roby

Fire Dispatch

Fire Dispatch frequencies for Fisher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fisher County FireFisher County Fire – Dispatch / County Commissioners, Analog (includes Roby/Rotan VFDs)154.2500
In 153.8900
94.8 PLFMNWNNY929
Fisher County FireFisher County Fire – Dispatch / County Commissioners, Digital (includes Roby/Rotan VFDs)154.2500
In 153.8900
NAC 076P25WNNY929

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fisher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fisher County FireFire Response155.8275
In 153.9275
NAC 076P25WQOL261

EMS Dispatch

EMS Dispatch frequencies for Fisher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fisher County EMSFisher County EMS – Dispatch / County Hospital Primary155.7750
In 150.8050
NAC 076P25 EncryptedKNHT815
Fisher County EMSEMS Initial Dispatch155.7750
In 150.8050
110.9 PLFMNKNHT815

Nearest trunked radio sites

Distances are measured from the center of Roby.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 71 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 74 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Site 10 · San Angelo (P25)
Project 25 · RFSS 0 · Site 10 (hex A) · NAC 014 · about 89 mi away
Control 854.9625, 855.2125, 855.7375, 855.9875, 857.4625, 858.4625, 859.4625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Roby?

We do not have a fire dispatch channel listed specifically for Roby. The county-level fire dispatch channels in the same county: Fisher County Fire 154.2500 MHz, narrow FM, 94.8 PL.

What frequency does EMS or the ambulance service use in Roby?

We do not have a EMS dispatch channel listed specifically for Roby. The county-level EMS dispatch channels in the same county: Fisher County EMS 155.7750 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Roby?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Roby?

For Roby, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.