About Hamlin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hamlin: Fisher County Fire 154.2500 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Hamlin: Fisher County EMS 155.7750 MHz, narrow FM, 110.9 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Fisher County channels that also cover Hamlin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fisher County Fire | Fisher County Fire – Dispatch / County Commissioners, Analog (includes Roby/Rotan VFDs) | 154.2500 In 153.8900 | 94.8 PL | FMN | WNNY929 |
| Fisher County Fire | Fisher County Fire – Dispatch / County Commissioners, Digital (includes Roby/Rotan VFDs) | 154.2500 In 153.8900 | NAC 076 | P25 | WNNY929 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fisher County Fire | Fire Response | 155.8275 In 153.9275 | NAC 076 | P25 | WQOL261 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fisher County EMS | Fisher County EMS – Dispatch / County Hospital Primary | 155.7750 In 150.8050 | NAC 076 | P25 Encrypted | KNHT815 |
| Fisher County EMS | EMS Initial Dispatch | 155.7750 In 150.8050 | 110.9 PL | FMN | KNHT815 |
Nearest trunked radio sites
Distances are measured from the center of Hamlin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hamlin?
We do not have a fire dispatch channel listed specifically for Hamlin. The county-level fire dispatch channels in the same county: Fisher County Fire 154.2500 MHz, narrow FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Hamlin?
We do not have a EMS dispatch channel listed specifically for Hamlin. The county-level EMS dispatch channels in the same county: Fisher County EMS 155.7750 MHz, narrow FM, 110.9 PL.
What scanner do I need to listen to fire and EMS in Hamlin?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Hamlin?
For Hamlin, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.