Skip to content

Hamlin Fire and EMS Frequencies

Hamlin in Jones County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Simulcast (Howard County Public Safety), about 88 miles away.

Hamlin also extends into Fisher County.

About Hamlin Fire and EMS Frequencies

Quick answer: Fire dispatch for Hamlin: Hamlin Fire 158.7300 MHz, narrow FM, 192.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Hamlin conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hamlin
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamlin FireHamlin Fire Dispatch158.7300
In 153.7400
192.8 PLFMNWPIB542

Nearest trunked radio sites

Distances are measured from the center of Hamlin.

Simulcast · Howard County Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 88 mi away
Control 769.30625, 770.30625, 771.30625, 772.30625, 773.48125, 774.70625
Big Spring · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 89 (hex 59) · NAC 130 · about 92 mi away
Control 152.5175, 152.7425
Voice 151.07, 154.1225
Ransom Canyon · Lubbock City-County Mutual Radio System
RFSS 4 · Site 4 (hex 4) · NAC E · about 100 mi away
Control 856.2375, 857.2375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hamlin?

Fire dispatch channels listed for Hamlin: Hamlin Fire 158.7300 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Hamlin?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hamlin?

For Hamlin, start with the Simulcast site of Howard County Public Safety. Its control channels are 769.30625, 770.30625, 771.30625, 772.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hamlin fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Hamlin are marked encrypted.