About Cameron Fire and EMS Frequencies
Quick answer: Fire dispatch for Cameron: Cameron Fire 159.1950 MHz, narrow FM, 162.2 PL. County-level ems dispatch that covers Cameron: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Cameron conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cameron Fire | Cameron Fire – Dispatch | 159.1950 In 158.8500 | 162.2 PL | FMN | KNNL840 |
Milam County channels that also cover Cameron
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Milam County EMS | Milam County EMS – Dispatch (American Medical Response) | 151.2425 In 159.4275 | 306 DPL | FMN | WQBV390 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Milam County EMS | Repeater (American Medical Response) | 155.1225 In 159.1425 | 306 DPL | FMN | WQHJ799 |
Nearest trunked radio sites
Distances are measured from the center of Cameron.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cameron?
Fire dispatch channels listed for Cameron: Cameron Fire 159.1950 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in Cameron?
We do not have a EMS dispatch channel listed specifically for Cameron. The county-level EMS dispatch channels in the same county: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.
What scanner do I need to listen to fire and EMS in Cameron?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Cameron?
For Cameron, start with the Caldwell site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.40625, 773.64375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cameron fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Cameron are marked encrypted.