Skip to content

Gause Fire and EMS Frequencies

Gause in Milam County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Caldwell (Texas Wide Area Radio Network (TxWARN)), about 20 miles away.

About Gause Fire and EMS Frequencies

Quick answer: Fire dispatch for Gause: Gause Fire 158.7900 MHz, narrow FM, 141.3 PL. County-level ems dispatch that covers Gause: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Gause conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gause
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gause FireGause Fire – Dispatch158.7900
In 153.9650
141.3 PLFMNWQDT666

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gause
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gause FireGause Fire – Tactical Channel155.7600141.3 PLFMN—

Milam County channels that also cover Gause

EMS Dispatch

EMS Dispatch frequencies for Milam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milam County EMSMilam County EMS – Dispatch (American Medical Response)151.2425
In 159.4275
306 DPLFMNWQBV390

EMS Tactical

EMS Tactical frequencies for Milam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milam County EMSRepeater (American Medical Response)155.1225
In 159.1425
306 DPLFMNWQHJ799

Nearest trunked radio sites

Distances are measured from the center of Gause.

Caldwell · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 44 (hex 2C) · NAC 1A1 · about 20 mi away
Control 772.40625, 773.64375
Voice 769.60625, 770.76875, 771.16875, 771.94375
Bryan · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 21 (hex 15) · NAC 1A1 · about 22 mi away
Control 773.14375, 774.39375
Voice 769.31875, 769.86875, 770.51875, 770.85625, 771.89375, 772.80625
Franklin · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 59 (hex 3B) · about 22 mi away
Control 770.69375, 773.03125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gause?

Fire dispatch channels listed for Gause: Gause Fire 158.7900 MHz, narrow FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Gause?

We do not have a EMS dispatch channel listed specifically for Gause. The county-level EMS dispatch channels in the same county: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.

What scanner do I need to listen to fire and EMS in Gause?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Gause?

For Gause, start with the Caldwell site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.40625, 773.64375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gause fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Gause are marked encrypted.