Skip to content

Rosebud Fire and EMS Frequencies

Rosebud in Falls County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Troy (Bell County (P25)), about 22 miles away.

About Rosebud Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rosebud: Falls County Fire 154.3700 MHz, FM, 165 DPL. County-level ems dispatch that covers Rosebud: Falls County EMS, Incorporated 154.4000 MHz, FM, 141.3 PL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Rosebud conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rosebud
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rosebud FireFire and Police155.0850
In 158.8350
100.0 PLFMWQBR340

Falls County channels that also cover Rosebud

Fire Dispatch

Fire Dispatch frequencies for Falls County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Falls County FireFalls County Fire – Dispatch154.3700
In 151.4750
165 DPLFMWNLM890

EMS Dispatch

EMS Dispatch frequencies for Falls County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Falls County EMS, IncorporatedDispatch VHF154.4000
In 153.7700
141.3 PLFMWNWV409
Falls County EMS, IncorporatedFalls County EMS, Incorporated – Dispatch (includes Limestone County)464.8500
In 469.8500
173.8 PLFMWPVY330

EMS Tactical

EMS Tactical frequencies for Falls County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Falls County EMS, IncorporatedRepeater (Rosebud Area)462.9500
In 467.9500
100.0 PLFMWNZD680
Falls County EMS, IncorporatedRepeater (Marlin Area, no longer licensed)462.9750
In 467.9750
114.8 PLFM—
Falls County EMS, IncorporatedRepeater (Marlin Area)463.7000
In 468.7000
123.0 PLFMWPVY330
Falls County EMS, IncorporatedRepeater (Hammond Area)464.1000
In 469.1000
123.0 PLFMWPVY330

Nearest trunked radio sites

Distances are measured from the center of Rosebud.

Troy · Bell County (P25)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC B · about 22 mi away
Control 769.10625, 769.83125, 770.55625
Franklin · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 59 (hex 3B) · about 29 mi away
Control 770.69375, 773.03125
Bell Simulcast · Bell County (P25)
Project 25 · RFSS 10 · Site 10 (hex A) · NAC 14 · about 30 mi away
Control 855.4625, 855.4875, 855.7375, 856.0875, 856.4625, 856.4875, 856.7375, 857.0875, 857.2375, 857.4625, 857.4875, 858.0375, 858.2375, 858.2625, 858.4625, 858.4875, 858.7375, 859.0375, 859.2375, 859.2625, 859.4625, 859.4875, 859.7375, 859.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rosebud?

We do not have a fire dispatch channel listed specifically for Rosebud. The county-level fire dispatch channels in the same county: Falls County Fire 154.3700 MHz, FM, 165 DPL.

What frequency does EMS or the ambulance service use in Rosebud?

We do not have a EMS dispatch channel listed specifically for Rosebud. The county-level EMS dispatch channels in the same county: Falls County EMS, Incorporated 154.4000 MHz, FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Rosebud?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Rosebud?

For Rosebud, start with the Troy site of Bell County (P25). Its control channels are 769.10625, 769.83125, 770.55625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rosebud fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Rosebud are marked encrypted.