Skip to content

Buckholts Fire and EMS Frequencies

We do not have frequencies listed specifically for Buckholts in Milam County, Texas yet. Countywide channels for Milam County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bell Simulcast (Bell County (P25)), about 24 miles away.

About Buckholts Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Buckholts: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Milam County channels that also cover Buckholts

EMS Dispatch

EMS Dispatch frequencies for Milam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milam County EMSMilam County EMS – Dispatch (American Medical Response)151.2425
In 159.4275
306 DPLFMNWQBV390

EMS Tactical

EMS Tactical frequencies for Milam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milam County EMSRepeater (American Medical Response)155.1225
In 159.1425
306 DPLFMNWQHJ799

Nearest trunked radio sites

Distances are measured from the center of Buckholts.

Bell Simulcast · Bell County (P25)
Project 25 · RFSS 10 · Site 10 (hex A) · NAC 14 · about 24 mi away
Control 855.4625, 855.4875, 855.7375, 856.0875, 856.4625, 856.4875, 856.7375, 857.0875, 857.2375, 857.4625, 857.4875, 858.0375, 858.2375, 858.2625, 858.4625, 858.4875, 858.7375, 859.0375, 859.2375, 859.2625, 859.4625, 859.4875, 859.7375, 859.7625
Troy · Bell County (P25)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC B · about 24 mi away
Control 769.10625, 769.83125, 770.55625
Williamson Simulcast · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 20 (hex 14) · NAC 133 · about 34 mi away
Control 857.9625, 858.9625, 859.5875, 859.9625
Voice 854.9625, 854.9875, 855.2125, 855.7125, 855.9875, 856.6875, 856.9625, 856.9875, 857.9875, 858.9875, 859.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Buckholts?

We do not have a EMS dispatch channel listed specifically for Buckholts. The county-level EMS dispatch channels in the same county: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.

What scanner do I need to listen to fire and EMS in Buckholts?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Buckholts?

For Buckholts, start with the Bell Simulcast site of Bell County (P25). Its control channels are 855.4625, 855.4875, 855.7375, 856.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.