Skip to content

Thorndale Fire and EMS Frequencies

Thorndale in Milam County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Williamson Simulcast (Greater Austin/Travis Regional Radio System (GATRRS)), about 23 miles away.

About Thorndale Fire and EMS Frequencies

Quick answer: Fire dispatch for Thorndale: Thorndale Fire 158.8350 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Thorndale: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Thorndale conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Thorndale
AgencyDescriptionFrequency (MHz)ToneModeFCC
Thorndale FireThorndale Fire – Dispatch158.8350
In 155.0250
179.9 PLFMNWPKL733

Milam County channels that also cover Thorndale

EMS Dispatch

EMS Dispatch frequencies for Milam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milam County EMSMilam County EMS – Dispatch (American Medical Response)151.2425
In 159.4275
306 DPLFMNWQBV390

EMS Tactical

EMS Tactical frequencies for Milam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milam County EMSRepeater (American Medical Response)155.1225
In 159.1425
306 DPLFMNWQHJ799

Nearest trunked radio sites

Distances are measured from the center of Thorndale.

Williamson Simulcast · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 20 (hex 14) · NAC 133 · about 23 mi away
Control 857.9625, 858.9625, 859.5875, 859.9625
Voice 854.9625, 854.9875, 855.2125, 855.7125, 855.9875, 856.6875, 856.9625, 856.9875, 857.9875, 858.9875, 859.9875
Caldwell · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 44 (hex 2C) · NAC 1A1 · about 28 mi away
Control 772.40625, 773.64375
Voice 769.60625, 770.76875, 771.16875, 771.94375
Burleson Manor IR · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 5 (hex 5) · about 30 mi away
Control 853.225, 853.525, 853.925
Voice 851.8875, 852.2875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Thorndale?

Fire dispatch channels listed for Thorndale: Thorndale Fire 158.8350 MHz, narrow FM, 179.9 PL.

What frequency does EMS or the ambulance service use in Thorndale?

We do not have a EMS dispatch channel listed specifically for Thorndale. The county-level EMS dispatch channels in the same county: Milam County EMS 151.2425 MHz, narrow FM, 306 DPL.

What scanner do I need to listen to fire and EMS in Thorndale?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Thorndale?

For Thorndale, start with the Williamson Simulcast site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 857.9625, 858.9625, 859.5875, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Thorndale fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Thorndale are marked encrypted.