About Kenedy Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kenedy: Karnes County Fire 155.3025 MHz, narrow FM, 251 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Karnes County channels that also cover Kenedy
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Karnes County Fire | Fire/EMS Dispatch | 155.3025 In 151.4525 | 251 DPL | FMN | WNZB247 |
| Karnes County Fire | Fire/EMS Dispatch | 155.3025 In 151.4525 | NAC 5B6 | P25 | WNZB247 |
Nearest trunked radio sites
Distances are measured from the center of Kenedy.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kenedy?
We do not have a fire dispatch channel listed specifically for Kenedy. The county-level fire dispatch channels in the same county: Karnes County Fire 155.3025 MHz, narrow FM, 251 DPL.
What scanner do I need to listen to fire and EMS in Kenedy?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Kenedy?
For Kenedy, start with the George West site of Coastal Bend Regional Interoperability Network. Its control channels are 771.26875, 772.14375, 772.74375, 773.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.