Skip to content

Yorktown Fire and EMS Frequencies

We do not have frequencies listed specifically for Yorktown in DeWitt County, Texas yet. Countywide channels for DeWitt County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Victoria (Victoria County), about 36 miles away.

About Yorktown Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Yorktown: Dewitt County Fire 155.5425 MHz, P25, NAC DC3. County-level ems dispatch that covers Yorktown: Dewitt County EMS 155.3175 MHz, P25, NAC DC2.

  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

DeWitt County channels that also cover Yorktown

Fire Dispatch

Fire Dispatch frequencies for DeWitt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dewitt County FireDewitt County Fire – Dispatch155.5425
In 154.0025
NAC DC3P25WRDD860

EMS Dispatch

EMS Dispatch frequencies for DeWitt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dewitt County EMSDewitt County EMS – Dispatch155.3175
In 153.8600
NAC DC2P25WRDD860

Nearest trunked radio sites

Distances are measured from the center of Yorktown.

Victoria · Victoria County
RFSS 7 · Site 1 (hex 1) · NAC 3A0 · about 36 mi away
Control 856.7375, 856.9875, 857.2625, 857.4625
Voice 856.4625, 856.7625, 856.9625, 857.7625, 857.9625, 857.9875, 858.2625
Lavaca County Simulcast · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 49 (hex 31) · NAC 1A0 · about 44 mi away
Control 859.5, 859.975
Voice 858.5, 858.975
Seguin · Alamo Area Regional Radio System (AARRS)
RFSS 9 · Site 9 (hex 9) · NAC 013 · about 50 mi away
Control 854.8625, 855.0125, 855.2125, 857.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Yorktown?

We do not have a fire dispatch channel listed specifically for Yorktown. The county-level fire dispatch channels in the same county: Dewitt County Fire 155.5425 MHz, P25, NAC DC3.

What frequency does EMS or the ambulance service use in Yorktown?

We do not have a EMS dispatch channel listed specifically for Yorktown. The county-level EMS dispatch channels in the same county: Dewitt County EMS 155.3175 MHz, P25, NAC DC2.

What scanner do I need to listen to fire and EMS in Yorktown?

A scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Yorktown?

For Yorktown, start with the Victoria site of Victoria County. Its control channels are 856.7375, 856.9875, 857.2625, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.