Skip to content

Runge Fire and EMS Frequencies

We do not have frequencies listed specifically for Runge in Karnes County, Texas yet. Countywide channels for Karnes County that may also cover this area are shown below when we have them. The closest trunked radio site we have is George West (Coastal Bend Regional Interoperability Network), about 45 miles away.

About Runge Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Runge: Karnes County Fire 155.3025 MHz, narrow FM, 251 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Karnes County channels that also cover Runge

Fire Dispatch

Fire Dispatch frequencies for Karnes County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Karnes County FireFire/EMS Dispatch155.3025
In 151.4525
251 DPLFMNWNZB247
Karnes County FireFire/EMS Dispatch155.3025
In 151.4525
NAC 5B6P25WNZB247

Nearest trunked radio sites

Distances are measured from the center of Runge.

George West · Coastal Bend Regional Interoperability Network
RFSS 1 · Site 1 (hex 1) · about 45 mi away
Control 771.26875, 772.14375, 772.74375, 773.46875, 774.46875
George West · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 50 (hex 32) · about 46 mi away
Control 770.95625, 773.29375
Voice 774.79375
Victoria · Victoria County
RFSS 7 · Site 1 (hex 1) · NAC 3A0 · about 47 mi away
Control 856.7375, 856.9875, 857.2625, 857.4625
Voice 856.4625, 856.7625, 856.9625, 857.7625, 857.9625, 857.9875, 858.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Runge?

We do not have a fire dispatch channel listed specifically for Runge. The county-level fire dispatch channels in the same county: Karnes County Fire 155.3025 MHz, narrow FM, 251 DPL.

What scanner do I need to listen to fire and EMS in Runge?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Runge?

For Runge, start with the George West site of Coastal Bend Regional Interoperability Network. Its control channels are 771.26875, 772.14375, 772.74375, 773.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.