Skip to content

Pettus Fire and EMS Frequencies

We do not have frequencies listed specifically for Pettus in Bee County, Texas yet. Countywide channels for Bee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is George West (Coastal Bend Regional Interoperability Network), about 27 miles away.

About Pettus Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pettus: Bee County Fire 154.4450 MHz, narrow FM, 167.9 PL; Pawnee Volunteer Fire Dispatch 155.9625 MHz, narrow FM, 156.7 PL; Pettus Volunteer Fire Dispatch 154.2950 MHz, narrow FM, 167.9 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Bee County channels that also cover Pettus

Fire Dispatch

Fire Dispatch frequencies for Bee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bee County FireSkidmore Volunteer Fire154.4450167.9 PLFMNWYR835
Pawnee Volunteer Fire DispatchPawnee Volunteer Fire Dispatch155.9625
In 151.7675
156.7 PLFMNWQPJ731
Pettus Volunteer Fire DispatchPettus Volunteer Fire Dispatch154.2950
In 158.8875
167.9 PLFMNWPMX474

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bee County FireSkidmore Volunteer Fire154.1750
In 158.8350
167.9 PLFMNWYR835

Nearest trunked radio sites

Distances are measured from the center of Pettus.

George West · Coastal Bend Regional Interoperability Network
RFSS 1 · Site 1 (hex 1) · about 27 mi away
Control 771.26875, 772.14375, 772.74375, 773.46875, 774.46875
George West · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 50 (hex 32) · about 27 mi away
Control 770.95625, 773.29375
Voice 774.79375
Mathis · Coastal Bend Regional Interoperability Network
RFSS 43 · Site 43 (hex 2B) · about 36 mi away
Control 851.4625, 852.4625, 853.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pettus?

We do not have a fire dispatch channel listed specifically for Pettus. The county-level fire dispatch channels in the same county: Bee County Fire 154.4450 MHz, narrow FM, 167.9 PL; Pawnee Volunteer Fire Dispatch 155.9625 MHz, narrow FM, 156.7 PL; Pettus Volunteer Fire Dispatch 154.2950 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Pettus?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pettus?

For Pettus, start with the George West site of Coastal Bend Regional Interoperability Network. Its control channels are 771.26875, 772.14375, 772.74375, 773.46875 MHz. Program a control channel first; the scanner finds the voice channels from it.