Skip to content

Beeville Fire and EMS Frequencies

Beeville in Bee County, Texas has 3 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Mathis (Coastal Bend Regional Interoperability Network), about 21 miles away.

About Beeville Fire and EMS Frequencies

Quick answer: Fire dispatch for Beeville: Beeville Fire 155.0400 MHz, narrow FM, 167.9 PL. EMS dispatch for Beeville: Beeville EMS 155.4000 MHz, narrow FM, 167.9 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Beeville conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Beeville
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beeville FireBeeville Fire – Dispatch155.0400167.9 PLFMNKDD969
Beeville FireBeeville Fire – Dispatch155.8050
In 159.4650
167.9 PLFMNKDD969

EMS Dispatch

EMS Dispatch frequencies for Beeville
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beeville EMSAngelcare EMS Dispatch155.4000
In 150.7900
167.9 PLFMNKNNY613

Bee County channels that also cover Beeville

Fire Dispatch

Fire Dispatch frequencies for Bee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bee County FireSkidmore Volunteer Fire154.4450167.9 PLFMNWYR835
Pawnee Volunteer Fire DispatchPawnee Volunteer Fire Dispatch155.9625
In 151.7675
156.7 PLFMNWQPJ731
Pettus Volunteer Fire DispatchPettus Volunteer Fire Dispatch154.2950
In 158.8875
167.9 PLFMNWPMX474

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bee County FireSkidmore Volunteer Fire154.1750
In 158.8350
167.9 PLFMNWYR835

Nearest trunked radio sites

Distances are measured from the center of Beeville.

Mathis · Coastal Bend Regional Interoperability Network
RFSS 43 · Site 43 (hex 2B) · about 21 mi away
Control 851.4625, 852.4625, 853.4625
George West · Coastal Bend Regional Interoperability Network
RFSS 1 · Site 1 (hex 1) · about 23 mi away
Control 771.26875, 772.14375, 772.74375, 773.46875, 774.46875
George West · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 50 (hex 32) · about 23 mi away
Control 770.95625, 773.29375
Voice 774.79375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Beeville?

Fire dispatch channels listed for Beeville: Beeville Fire 155.0400 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Beeville?

EMS dispatch channels listed for Beeville: Beeville EMS 155.4000 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Beeville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Beeville?

For Beeville, start with the Mathis site of Coastal Bend Regional Interoperability Network. Its control channels are 851.4625, 852.4625, 853.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Beeville fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Beeville are marked encrypted.