Skip to content

Poth Fire and EMS Frequencies

We do not have frequencies listed specifically for Poth in Wilson County, Texas yet. Countywide channels for Wilson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Southeast Simulcast (Alamo Area Regional Radio System (AARRS)), about 25 miles away.

About Poth Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Poth: Wilson County ESD #2 Emergency Services 153.7775 MHz, narrow FM, 118.8 PL; Wilson County Fire 155.5500 MHz, narrow FM, 203.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Wilson County channels that also cover Poth

Fire Dispatch

Fire Dispatch frequencies for Wilson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilson County ESD #2 Emergency ServicesFire Analog153.7775
In 155.7750
118.8 PLFMNWQOB458
Wilson County ESD #2 Emergency ServicesFire Digital153.7775
In 155.7750
NAC 315P25WQOB458
Wilson County FireFire/EMS Backup (All Operations on LCRA)155.5500
In 154.8300
203.5 PLFMNKVF685

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wilson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilson County FireTactical 1A (Stockdale)154.2650
In 150.8050
114.8 PLFMNWQOB458
Wilson County FireTactical 1D (Stockdale)154.2650
In 150.8050
NAC 293P25WQOB458
Wilson County FireTactical 2D (Poth/Floresville)155.7750
In 153.7775
NAC 293P25WQOB458
Wilson County FireTactical 2A (Poth/Floresville)155.7750
In 153.7775
114.8 PLFMNWQOB458

Nearest trunked radio sites

Distances are measured from the center of Poth.

Southeast Simulcast · Alamo Area Regional Radio System (AARRS)
RFSS 170 · Site 170 (hex AA) · NAC 0B4 · about 25 mi away
Control 852.275, 852.7875, 852.8375, 853.1875, 853.5125, 853.8375, 853.8875, 854.9125, 855.6125, 855.9375, 858.2875, 858.7625
South Bexar · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 54 (hex 36) · about 27 mi away
Control 774.31875, 774.78125
Voice 770.94375, 773.28125, 773.56875, 774.03125
Bexar County · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 12 (hex C) · NAC 130 · about 31 mi away
Control 770.93125, 773.09375
Voice 769.43125, 769.71875, 770.18125, 770.46875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Poth?

We do not have a fire dispatch channel listed specifically for Poth. The county-level fire dispatch channels in the same county: Wilson County ESD #2 Emergency Services 153.7775 MHz, narrow FM, 118.8 PL; Wilson County Fire 155.5500 MHz, narrow FM, 203.5 PL.

What scanner do I need to listen to fire and EMS in Poth?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Poth?

For Poth, start with the Southeast Simulcast site of Alamo Area Regional Radio System (AARRS). Its control channels are 852.275, 852.7875, 852.8375, 853.1875 MHz. Program a control channel first; the scanner finds the voice channels from it.