Skip to content

Plainview Fire and EMS Frequencies

Plainview in Hale County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Abernathy (Lubbock City-County Mutual Radio System), about 26 miles away.

About Plainview Fire and EMS Frequencies

Quick answer: Fire dispatch for Plainview: Plainview Fire 155.0850 MHz, P25, NAC 95. EMS dispatch for Plainview: Plainview EMS 463.0500 MHz, FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Plainview conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Plainview
AgencyDescriptionFrequency (MHz)ToneModeFCC
Plainview FirePlainview Fire Primary155.0850
In 153.8750
NAC 95P25KDU473

EMS Dispatch

EMS Dispatch frequencies for Plainview
AgencyDescriptionFrequency (MHz)ToneModeFCC
Plainview EMSPlainview EMS Primary463.0500
In 468.0500
FMWNFU925

Hale County channels that also cover Plainview

Fire Dispatch

Fire Dispatch frequencies for Hale County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hale County FireSheriff/Fire Primary156.0900
In 154.8600
P25KNGR688

Nearest trunked radio sites

Distances are measured from the center of Plainview.

Abernathy · Lubbock City-County Mutual Radio System
RFSS 5 · Site 5 (hex 5) · about 26 mi away
Control 856.7375, 858.7375, 859.7375
Idalou · Lubbock City-County Mutual Radio System
RFSS 3 · Site 3 (hex 3) · about 37 mi away
Control 856.4875, 857.4875, 858.4875
Simulcast · Lubbock City-County Mutual Radio System
RFSS 10 · Site 10 (hex A) · NAC 14 · about 40 mi away
Control 854.9875, 855.2375, 855.4875, 855.7375, 856.2125, 856.7125, 856.9875, 857.4625, 857.7375, 858.2125, 858.4375, 858.7125, 858.9875, 859.4875, 859.9875
Voice 856.4625, 857.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Plainview?

Fire dispatch channels listed for Plainview: Plainview Fire 155.0850 MHz, P25, NAC 95.

What frequency does EMS or the ambulance service use in Plainview?

EMS dispatch channels listed for Plainview: Plainview EMS 463.0500 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Plainview?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Plainview?

For Plainview, start with the Abernathy site of Lubbock City-County Mutual Radio System. Its control channels are 856.7375, 858.7375, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Plainview fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Plainview are marked encrypted.