Skip to content

Abernathy Fire and EMS Frequencies

Abernathy in Hale County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Abernathy (Lubbock City-County Mutual Radio System), about 1 miles away.

About Abernathy Fire and EMS Frequencies

Quick answer: Fire dispatch for Abernathy: Abernathy Fire 156.0000 MHz, FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Abernathy conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Abernathy
AgencyDescriptionFrequency (MHz)ToneModeFCC
Abernathy FireAbernathy Fire Primary156.0000
In 155.1450
FMKCW731

Hale County channels that also cover Abernathy

Fire Dispatch

Fire Dispatch frequencies for Hale County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hale County FireSheriff/Fire Primary156.0900
In 154.8600
P25KNGR688

Nearest trunked radio sites

Distances are measured from the center of Abernathy.

Abernathy · Lubbock City-County Mutual Radio System
RFSS 5 · Site 5 (hex 5) · about 1 mi away
Control 856.7375, 858.7375, 859.7375
Simulcast · Lubbock City-County Mutual Radio System
RFSS 10 · Site 10 (hex A) · NAC 14 · about 14 mi away
Control 854.9875, 855.2375, 855.4875, 855.7375, 856.2125, 856.7125, 856.9875, 857.4625, 857.7375, 858.2125, 858.4375, 858.7125, 858.9875, 859.4875, 859.9875
Voice 856.4625, 857.4875
Idalou · Lubbock City-County Mutual Radio System
RFSS 3 · Site 3 (hex 3) · about 15 mi away
Control 856.4875, 857.4875, 858.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Abernathy?

Fire dispatch channels listed for Abernathy: Abernathy Fire 156.0000 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Abernathy?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Abernathy?

For Abernathy, start with the Abernathy site of Lubbock City-County Mutual Radio System. Its control channels are 856.7375, 858.7375, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Abernathy fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Abernathy are marked encrypted.