Skip to content

Tulia Fire and EMS Frequencies

We do not have frequencies listed specifically for Tulia in Swisher County, Texas yet. Countywide channels for Swisher County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Randall County (Amarillo Radio Communications System (ARCS)), about 30 miles away.

About Tulia Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Tulia: Swisher County Fire 154.2125 MHz, narrow FM, 627 DPL. County-level ems dispatch that covers Tulia: Swisher County EMS 155.1075 MHz, narrow FM, 627 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Swisher County channels that also cover Tulia

Fire Dispatch

Fire Dispatch frequencies for Swisher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Swisher County FireSwisher County Fire – Dispatch (Tulia PANCOM)154.2125
In 154.7175
627 DPLFMNWQGJ376
Swisher County FireSwisher County Fire – Dispatch (Tulia PANCOM)154.2125
In 154.7175
NAC 61FP25WQGJ376
Swisher County FireSwisher County Fire – Dispatch (Happy PANCOM)155.6325
In 154.7175
627 DPLFMNWQGJ376
Swisher County FireSwisher County Fire – Dispatch (Happy PANCOM)155.6325
In 154.7175
NAC 61FP25WQGJ376

EMS Dispatch

EMS Dispatch frequencies for Swisher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Swisher County EMSSwisher County EMS – Dispatch (Tulia PANCOM)155.1075
In 154.0475
627 DPLFMNWQGJ376
Swisher County EMSSwisher County EMS – Dispatch (Tulia PANCOM)155.1075
In 154.0475
NAC 61FP25WQGJ376

Nearest trunked radio sites

Distances are measured from the center of Tulia.

Randall County · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 3 (hex 3) · NAC 953 · about 30 mi away
Control 772.98125, 773.68125, 774.18125, 774.90625
Voice 771.68125, 772.30625
Potter County · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 1 (hex 1) · NAC 951 · about 45 mi away
Control 853.1875, 853.4375, 853.6875, 853.9875
Voice 851.3375, 851.65, 851.8375, 852.1125, 852.3625, 852.6125, 852.8875
Abernathy · Lubbock City-County Mutual Radio System
RFSS 5 · Site 5 (hex 5) · about 49 mi away
Control 856.7375, 858.7375, 859.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Tulia?

We do not have a fire dispatch channel listed specifically for Tulia. The county-level fire dispatch channels in the same county: Swisher County Fire 154.2125 MHz, narrow FM, 627 DPL.

What frequency does EMS or the ambulance service use in Tulia?

We do not have a EMS dispatch channel listed specifically for Tulia. The county-level EMS dispatch channels in the same county: Swisher County EMS 155.1075 MHz, narrow FM, 627 DPL.

What scanner do I need to listen to fire and EMS in Tulia?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Tulia?

For Tulia, start with the Randall County site of Amarillo Radio Communications System (ARCS). Its control channels are 772.98125, 773.68125, 774.18125, 774.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.