About Hart Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hart: Castro County Fire 154.3700 MHz, narrow FM, 023 DPL. County-level ems dispatch that covers Hart: Castro County EMS 151.0925 MHz, narrow FM, 023 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Castro County channels that also cover Hart
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Castro County Fire | Castro County Fire – Dispatch (PANCOM) | 154.3700 In 153.7700 | 023 DPL | FMN | WQGP277 |
| Castro County Fire | Castro County Fire – Dispatch (PANCOM) | 154.3700 In 153.7700 | NAC 61F | P25 | WQGP277 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Castro County EMS | Castro County EMS – Dispatch (PANCOM) | 151.0925 In 154.8075 | 023 DPL | FMN | WQGP277 |
| Castro County EMS | Castro County EMS – Dispatch (PANCOM) | 151.0925 In 154.8075 | NAC 61F | P25 | WQGP277 |
Nearest trunked radio sites
Distances are measured from the center of Hart.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hart?
We do not have a fire dispatch channel listed specifically for Hart. The county-level fire dispatch channels in the same county: Castro County Fire 154.3700 MHz, narrow FM, 023 DPL.
What frequency does EMS or the ambulance service use in Hart?
We do not have a EMS dispatch channel listed specifically for Hart. The county-level EMS dispatch channels in the same county: Castro County EMS 151.0925 MHz, narrow FM, 023 DPL.
What scanner do I need to listen to fire and EMS in Hart?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Hart?
For Hart, start with the Abernathy site of Lubbock City-County Mutual Radio System. Its control channels are 856.7375, 858.7375, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.