Skip to content

Dimmitt Fire and EMS Frequencies

Dimmitt in Castro County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Randall County (Amarillo Radio Communications System (ARCS)), about 37 miles away.

About Dimmitt Fire and EMS Frequencies

Quick answer: Fire dispatch for Dimmitt: Dimmitt Fire 154.4450 MHz, FM, 173.8 PL. County-level ems dispatch that covers Dimmitt: Castro County EMS 151.0925 MHz, narrow FM, 023 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Dimmitt conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dimmitt
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dimmitt FireDimmitt Volunteer Fire Department Dispatch154.4450
In 153.7700
173.8 PLFMWPFY350

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Dimmitt
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dimmitt FireDimmitt Volunteer Fire Department Repeater154.3700136.5 PLFMWQGP277

Castro County channels that also cover Dimmitt

Fire Dispatch

Fire Dispatch frequencies for Castro County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Castro County FireCastro County Fire – Dispatch (PANCOM)154.3700
In 153.7700
023 DPLFMNWQGP277
Castro County FireCastro County Fire – Dispatch (PANCOM)154.3700
In 153.7700
NAC 61FP25WQGP277

EMS Dispatch

EMS Dispatch frequencies for Castro County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Castro County EMSCastro County EMS – Dispatch (PANCOM)151.0925
In 154.8075
023 DPLFMNWQGP277
Castro County EMSCastro County EMS – Dispatch (PANCOM)151.0925
In 154.8075
NAC 61FP25WQGP277

Nearest trunked radio sites

Distances are measured from the center of Dimmitt.

Randall County · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 3 (hex 3) · NAC 953 · about 37 mi away
Control 772.98125, 773.68125, 774.18125, 774.90625
Voice 771.68125, 772.30625
Potter County · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 1 (hex 1) · NAC 951 · about 50 mi away
Control 853.1875, 853.4375, 853.6875, 853.9875
Voice 851.3375, 851.65, 851.8375, 852.1125, 852.3625, 852.6125, 852.8875
Abernathy · Lubbock City-County Mutual Radio System
RFSS 5 · Site 5 (hex 5) · about 56 mi away
Control 856.7375, 858.7375, 859.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dimmitt?

Fire dispatch channels listed for Dimmitt: Dimmitt Fire 154.4450 MHz, FM, 173.8 PL.

What frequency does EMS or the ambulance service use in Dimmitt?

We do not have a EMS dispatch channel listed specifically for Dimmitt. The county-level EMS dispatch channels in the same county: Castro County EMS 151.0925 MHz, narrow FM, 023 DPL.

What scanner do I need to listen to fire and EMS in Dimmitt?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Dimmitt?

For Dimmitt, start with the Randall County site of Amarillo Radio Communications System (ARCS). Its control channels are 772.98125, 773.68125, 774.18125, 774.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dimmitt fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Dimmitt are marked encrypted.