About Plainview Police Frequencies
Quick answer: Dispatch for Plainview: Plainview Police 155.2500 MHz, P25, NAC 293.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Plainview conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Plainview Police | Plainview Police | 155.2500 In 154.8150 | NAC 293 | P25 | KKD396 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Plainview Police | Plainview Police | 155.7000 In 154.7550 | P25 | KKD396 |
Hale County channels that also cover Plainview
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hale County Sheriff | Sheriff/Fire Primary | 156.0900 In 154.8600 | P25 | KNGR688 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hale County Sheriff | Hale County Sheriff – Tactical Channel | 155.5200 | NAC 293 | P25 | KNGR688 |
Nearest trunked radio sites
Distances are measured from the center of Plainview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Plainview?
Dispatch channels listed for Plainview: Plainview Police 155.2500 MHz, P25, NAC 293.
What scanner do I need to listen to police in Plainview?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Plainview?
For Plainview, start with the Abernathy site of Lubbock City-County Mutual Radio System. Its control channels are 856.7375, 858.7375, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Plainview police frequencies encrypted?
None of the 2 conventional frequencies listed for Plainview are marked encrypted.