Skip to content

Custer City Fire and EMS Frequencies

We do not have frequencies listed specifically for Custer City in Custer County, Oklahoma yet. Countywide channels for Custer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Weatherford (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 11 miles away.

About Custer City Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Custer City: Custer County Fire 154.1300 MHz, DMR, CC 7 · TG 500 · SL 1. County-level ems dispatch that covers Custer City: Air Evac Medical Helicopters 159.7725 MHz, narrow FM, 114 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Custer County channels that also cover Custer City

Fire Dispatch

Fire Dispatch frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Custer County FireCounty Fire154.1300CC 7 · TG 500 · SL 1DMR—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Custer County FireCounty Fire Task Force154.3700047 DPLFMNWPSI992
Custer County FireCounty Fire Task Force154.4300136.5 PLFMNKNNT316
Custer County FireCounty Fire Task Force155.3850110.9 PLFMNKNHD643

EMS Dispatch

EMS Dispatch frequencies for Custer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac -- Weatherford Base159.7725114 DPLFMNWQVD795

Nearest trunked radio sites

Distances are measured from the center of Custer City.

Weatherford · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 44 (hex 2C) · NAC 929 · about 11 mi away
Control 859.9875, 860.9875
Voice 855.9875, 856.9875, 857.9875, 858.9875
Elk City · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 43 (hex 2B) · NAC 929 · about 36 mi away
Control 856.2125, 857.2125
Voice 852.5375, 852.9625, 853.9875, 855.2125
Geary · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 9 (hex 9) · NAC 92C · about 37 mi away
Control 859.4875, 860.4875
Voice 856.4875, 857.4875, 858.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Custer City?

We do not have a fire dispatch channel listed specifically for Custer City. The county-level fire dispatch channels in the same county: Custer County Fire 154.1300 MHz, DMR, CC 7 · TG 500 · SL 1.

What frequency does EMS or the ambulance service use in Custer City?

We do not have a EMS dispatch channel listed specifically for Custer City. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 159.7725 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Custer City?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Custer City?

For Custer City, start with the Weatherford site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9875, 860.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.