Skip to content

Fay Fire and EMS Frequencies

We do not have frequencies listed specifically for Fay in Dewey County, Oklahoma yet. Countywide channels for Dewey County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Weatherford (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 22 miles away.

About Fay Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fay: Leedy Fire 158.8950 MHz, narrow FM, no tone. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Dewey County Fire talkgroup 425 (hex 1a9).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fay, start with the Weatherford site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 22 miles away. Its control channels: 859.9875, 860.9875 MHz.

Data updated .

Dewey County channels that also cover Fay

Fire Dispatch

Fire Dispatch frequencies for Dewey County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Leedy FireRural Fire Dispatch158.8950
In 153.7850
FMNWPYT332

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Dewey County FireDewey County Fire – Dispatch4251a9D

Nearest trunked radio sites

Distances are measured from the center of Fay.

Weatherford · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 44 (hex 2C) · NAC 929 · about 22 mi away
Control 859.9875, 860.9875
Voice 855.9875, 856.9875, 857.9875, 858.9875
Geary · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 9 (hex 9) · NAC 92C · about 30 mi away
Control 859.4875, 860.4875
Voice 856.4875, 857.4875, 858.4875
Elk City · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 43 (hex 2B) · NAC 929 · about 52 mi away
Control 856.2125, 857.2125
Voice 852.5375, 852.9625, 853.9875, 855.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fay?

We do not have a fire dispatch channel listed specifically for Fay. The county-level fire dispatch channels in the same county: Leedy Fire 158.8950 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Fay?

Yes. The county-level systems that cover Fay are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fay?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fay?

For Fay, start with the Weatherford site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9875, 860.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.