Skip to content

Hydro Fire and EMS Frequencies

We do not have frequencies listed specifically for Hydro in Blaine County, Oklahoma yet. Countywide channels for Blaine County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Weatherford (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 12 miles away.

About Hydro Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hydro: Blaine County Fire 158.8350 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Blaine County channels that also cover Hydro

Fire Dispatch

Fire Dispatch frequencies for Blaine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blaine County FireFire, EMS and Emergency Management158.8350
In 153.8000
FMNWQAV385

Nearest trunked radio sites

Distances are measured from the center of Hydro.

Weatherford · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 44 (hex 2C) · NAC 929 · about 12 mi away
Control 859.9875, 860.9875
Voice 855.9875, 856.9875, 857.9875, 858.9875
Geary · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 9 (hex 9) · NAC 92C · about 19 mi away
Control 859.4875, 860.4875
Voice 856.4875, 857.4875, 858.4875
Anadarko · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 45 (hex 2D) · NAC 92A · about 38 mi away
Control 853.5875, 853.85
Voice 851.45, 852.225, 852.4, 853.225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hydro?

We do not have a fire dispatch channel listed specifically for Hydro. The county-level fire dispatch channels in the same county: Blaine County Fire 158.8350 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Hydro?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hydro?

For Hydro, start with the Weatherford site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9875, 860.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.