About Clinton Fire and EMS Frequencies
Quick answer: Fire dispatch for Clinton: Clinton Fire 154.4300 MHz, DMR, CC 5 · TG 200 · SL 1. EMS dispatch for Clinton: Clinton EMS 155.1900 MHz, DMR, CC 1 · TG * · SL 1.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Clinton conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton Fire | Clinton / Arapaho Fire Dispatch | 154.4300 In 153.7700 | CC 5 · TG 200 · SL 1 | DMR | KNNT316 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton Fire | Clinton Fire – Fire Ground | 154.4300 In 153.7700 | CC 5 · TG 100 · SL 2 | DMR | KNNT316 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clinton EMS | Clinton EMS – Dispatch | 155.1900 | CC 1 · TG * · SL 1 | DMR | KKA452 |
Custer County channels that also cover Clinton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | County Fire | 154.1300 | CC 7 · TG 500 · SL 1 | DMR | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | County Fire Task Force | 154.3700 | 047 DPL | FMN | WPSI992 |
| Custer County Fire | County Fire Task Force | 154.4300 | 136.5 PL | FMN | KNNT316 |
| Custer County Fire | County Fire Task Force | 155.3850 | 110.9 PL | FMN | KNHD643 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopters | Air Evac -- Weatherford Base | 159.7725 | 114 DPL | FMN | WQVD795 |
Nearest trunked radio sites
Distances are measured from the center of Clinton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clinton?
Fire dispatch channels listed for Clinton: Clinton Fire 154.4300 MHz, DMR, CC 5 · TG 200 · SL 1.
What frequency does EMS or the ambulance service use in Clinton?
EMS dispatch channels listed for Clinton: Clinton EMS 155.1900 MHz, DMR, CC 1 · TG * · SL 1.
What scanner do I need to listen to fire and EMS in Clinton?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Clinton?
For Clinton, start with the Weatherford site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9875, 860.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Clinton fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Clinton are marked encrypted.