About Butler Fire and EMS Frequencies
Quick answer: Fire dispatch for Butler: Butler Fire 154.3700 MHz, DMR, CC 14 · TG 400 · SL 1. County-level ems dispatch that covers Butler: Air Evac Medical Helicopters 159.7725 MHz, narrow FM, 114 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Butler conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Butler Fire | Butler Fire – Dispatch | 154.3700 In 150.8050 | CC 14 · TG 400 · SL 1 | DMR | WPSI992 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Butler Fire | Butler Fire – Fire Ground | 154.3700 In 150.8050 | CC 14 · TG 400 · SL 2 | DMR | WPSI992 |
Custer County channels that also cover Butler
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | County Fire | 154.1300 | CC 7 · TG 500 · SL 1 | DMR | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | County Fire Task Force | 154.3700 | 047 DPL | FMN | WPSI992 |
| Custer County Fire | County Fire Task Force | 154.4300 | 136.5 PL | FMN | KNNT316 |
| Custer County Fire | County Fire Task Force | 155.3850 | 110.9 PL | FMN | KNHD643 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopters | Air Evac -- Weatherford Base | 159.7725 | 114 DPL | FMN | WQVD795 |
Nearest trunked radio sites
Distances are measured from the center of Butler.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Butler?
Fire dispatch channels listed for Butler: Butler Fire 154.3700 MHz, DMR, CC 14 · TG 400 · SL 1.
What frequency does EMS or the ambulance service use in Butler?
We do not have a EMS dispatch channel listed specifically for Butler. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 159.7725 MHz, narrow FM, 114 DPL.
What scanner do I need to listen to fire and EMS in Butler?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Butler?
For Butler, start with the Elk City site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 856.2125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Butler fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Butler are marked encrypted.