About Oneida County Fire and EMS Frequencies
Quick answer: Fire dispatch for Oneida County: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL. EMS dispatch for Oneida County: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Oneida County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Fire | Paging at Lennox | 155.3025 | 179.9 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Three Lakes Fire (114.8 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Fire District Alpha (Shoepke, Pelican Lake Area, 167.9 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Howard Young Medical Center Ambulances (Minocqua, 186.2 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Fire | Oneida County Fire – Fire Ground | 154.3550 | 114.8 PL | FMN | WRZ612 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County EMS | Oneida County EMS – Dispatch | 154.4450 In 153.8900 | 114.8 PL | FMN | WRZ612 |
| Oneida County EMS | Paging at Woodruff | 155.0775 | NAC 1E1 | P25 | KTK556 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Hospital | EMS to St. Mary's Hospital | 155.3400 | 114.8 PL | FMN | KTT980 |
Radio system sites in Oneida County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Oneida County
Common questions
What frequency does the fire department use in Oneida County?
Fire dispatch channels listed for Oneida County: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL.
What frequency does EMS or the ambulance service use in Oneida County?
EMS dispatch channels listed for Oneida County: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Oneida County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Oneida County?
For Oneida County, start with the Squirrel Hill site of WISCOM. Its control channels are 139.1125, 152.2175, 152.6075, 152.7725 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Oneida County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Oneida County are marked encrypted.