About Crescent Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Crescent: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Crescent: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL. Trunked: WISCOM, for example Crescent Fire talkgroup 44307 (hex ad13).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: WISCOM: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Crescent, start with the Lookout Mountain site of WISCOM, about 15 miles away. Its control channels: 139.9625, 152.1875, 152.6675 MHz.
Data updated .
Crescent trunked talkgroups
WISCOM
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Crescent Fire | Crescent Fire Department | 44307 | ad13 | D |
Oneida County channels that also cover Crescent
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Fire | Paging at Lennox | 155.3025 | 179.9 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Three Lakes Fire (114.8 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Fire District Alpha (Shoepke, Pelican Lake Area, 167.9 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Howard Young Medical Center Ambulances (Minocqua, 186.2 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Fire | Oneida County Fire – Fire Ground | 154.3550 | 114.8 PL | FMN | WRZ612 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County EMS | Oneida County EMS – Dispatch | 154.4450 In 153.8900 | 114.8 PL | FMN | WRZ612 |
| Oneida County EMS | Paging at Woodruff | 155.0775 | NAC 1E1 | P25 | KTK556 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Hospital | EMS to St. Mary's Hospital | 155.3400 | 114.8 PL | FMN | KTT980 |
Nearest trunked radio sites
Distances are measured from the center of Crescent.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Crescent?
We do not have a fire dispatch channel listed specifically for Crescent. The county-level fire dispatch channels in the same county: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL.
What frequency does EMS or the ambulance service use in Crescent?
We do not have a EMS dispatch channel listed specifically for Crescent. The county-level EMS dispatch channels in the same county: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Crescent?
Yes. Fire and EMS talkgroups are listed for WISCOM: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Crescent?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Crescent?
For Crescent, start with the Lookout Mountain site of WISCOM. Its control channels are 139.9625, 152.1875, 152.6675 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Crescent fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Crescent are marked encrypted.