Skip to content

Enterprise Fire and EMS Frequencies

We do not have frequencies listed specifically for Enterprise in Oneida County, Wisconsin yet. Countywide channels for Oneida County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lookout Mountain (WISCOM), about 9 miles away.

About Enterprise Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Enterprise: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Enterprise: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Oneida County channels that also cover Enterprise

Fire Dispatch

Fire Dispatch frequencies for Oneida County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oneida County FirePaging at Lennox155.3025179.9 PLFMNWXP614
Oneida County FireOneida County Fire – Three Lakes Fire (114.8 PL on input)155.8050
In 158.9550
118.8 PLFMNWXP614
Oneida County FireOneida County Fire – Fire District Alpha (Shoepke, Pelican Lake Area, 167.9 PL on input)155.8050
In 158.9550
118.8 PLFMNWXP614
Oneida County FireOneida County Fire – Howard Young Medical Center Ambulances (Minocqua, 186.2 PL on input)155.8050
In 158.9550
118.8 PLFMNWXP614

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Oneida County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oneida County FireOneida County Fire – Fire Ground154.3550114.8 PLFMNWRZ612

EMS Dispatch

EMS Dispatch frequencies for Oneida County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oneida County EMSOneida County EMS – Dispatch154.4450
In 153.8900
114.8 PLFMNWRZ612
Oneida County EMSPaging at Woodruff155.0775NAC 1E1P25KTK556

Hospitals & Medical

Hospitals & Medical frequencies for Oneida County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oneida County HospitalEMS to St. Mary's Hospital155.3400114.8 PLFMNKTT980

Nearest trunked radio sites

Distances are measured from the center of Enterprise.

Lookout Mountain · WISCOM
RFSS 1 · Site 31 (hex 1F) · NAC B0A · about 9 mi away
Control 139.9625, 152.1875, 152.6675
Voice 151.07, 155.01
DOC Lincoln Hills · WISCOM
RFSS 1 · Site 207 (hex CF) · NAC B0C · about 19 mi away
Control 856.1375, 856.9375, 858.9375, 859.9375
Crandon · WISCOM
RFSS 1 · Site 27 (hex 1B) · NAC B06 · about 22 mi away
Control 139.7375, 151.235, 152.8175
Voice 154.16, 155.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Enterprise?

We do not have a fire dispatch channel listed specifically for Enterprise. The county-level fire dispatch channels in the same county: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL.

What frequency does EMS or the ambulance service use in Enterprise?

We do not have a EMS dispatch channel listed specifically for Enterprise. The county-level EMS dispatch channels in the same county: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Enterprise?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Enterprise?

For Enterprise, start with the Lookout Mountain site of WISCOM. Its control channels are 139.9625, 152.1875, 152.6675 MHz. Program a control channel first; the scanner finds the voice channels from it.