About Stella Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Stella: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Stella: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Oneida County channels that also cover Stella
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Fire | Paging at Lennox | 155.3025 | 179.9 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Three Lakes Fire (114.8 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Fire District Alpha (Shoepke, Pelican Lake Area, 167.9 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
| Oneida County Fire | Oneida County Fire – Howard Young Medical Center Ambulances (Minocqua, 186.2 PL on input) | 155.8050 In 158.9550 | 118.8 PL | FMN | WXP614 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Fire | Oneida County Fire – Fire Ground | 154.3550 | 114.8 PL | FMN | WRZ612 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County EMS | Oneida County EMS – Dispatch | 154.4450 In 153.8900 | 114.8 PL | FMN | WRZ612 |
| Oneida County EMS | Paging at Woodruff | 155.0775 | NAC 1E1 | P25 | KTK556 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oneida County Hospital | EMS to St. Mary's Hospital | 155.3400 | 114.8 PL | FMN | KTT980 |
Nearest trunked radio sites
Distances are measured from the center of Stella.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Stella?
We do not have a fire dispatch channel listed specifically for Stella. The county-level fire dispatch channels in the same county: Oneida County Fire 155.3025 MHz, narrow FM, 179.9 PL.
What frequency does EMS or the ambulance service use in Stella?
We do not have a EMS dispatch channel listed specifically for Stella. The county-level EMS dispatch channels in the same county: Oneida County EMS 154.4450 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Stella?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Stella?
For Stella, start with the Crandon site of WISCOM. Its control channels are 139.7375, 151.235, 152.8175 MHz. Program a control channel first; the scanner finds the voice channels from it.