About Upshur County Fire and EMS Frequencies
Quick answer: Fire dispatch for Upshur County: Upshur County Fire 155.3025 MHz, P25, NAC 349. EMS dispatch for Upshur County: Upshur County EMS 150.9950 MHz, P25, NAC 101.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Upshur County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Upshur County Fire | ESD #1 Dispatch | 155.3025 In 153.8900 | NAC 349 | P25 | WSCK369 |
| Upshur County Fire | ESD #1 Dispatch (transitional) | 155.3025 In 153.8900 | 186.2 PL | FMN | WSCK369 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harmony Consolidated Fire Department | Harmony Consolidated Fire Department – Tactical Channel | 155.6775 In 154.1750 | 331 DPL | FMN | WPGW436 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Upshur County EMS | Upshur County EMS – Dispatch (Digital) | 150.9950 In 159.0150 | NAC 101 | P25 | WQLN530 |
Radio system sites in Upshur County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Upshur County
- Bethlehem
- Bettie
- Big Sandy
- Brumley
- Center Point
- Clarksville City
- Coffeeville
- Concord
- Cox
- Cross Roads
- Diana
- East Mountain
- Enoch
- Enon
- Ewell
- Gilmer
- Gladewater
- Glenwood
- Grice
- Hopewell
- Indian Rock
- James
- Kelsey
- Lake Providence
- Latch
- Little Mound
- Mings Chapel
- Ore City
- Piedmont
- Pleasant Hill
- Pritchett
- Red Rock
- Rhonesboro
- Rosewood
- Sand Hill
- Shady Grove
- Simpsonville
- Smith
- Snow Hill
- Union Grove
- Union Hill
- Valley View
- Warren City
- West Mountain
- Zion Hill
Common questions
What frequency does the fire department use in Upshur County?
Fire dispatch channels listed for Upshur County: Upshur County Fire 155.3025 MHz, P25, NAC 349.
What frequency does EMS or the ambulance service use in Upshur County?
EMS dispatch channels listed for Upshur County: Upshur County EMS 150.9950 MHz, P25, NAC 101.
What scanner do I need to listen to fire and EMS in Upshur County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Upshur County?
For Upshur County, start with the Gilmer site of Texas Wide Area Radio Network (TxWARN). Its control channels are 771.98125, 772.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Upshur County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Upshur County are marked encrypted.