Skip to content

Bettie Fire and EMS Frequencies

We do not have frequencies listed specifically for Bettie in Upshur County, Texas yet. Countywide channels for Upshur County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gilmer (Texas Wide Area Radio Network (TxWARN)), about 9 miles away.

About Bettie Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bettie: Upshur County Fire 155.3025 MHz, P25, NAC 349. County-level ems dispatch that covers Bettie: Upshur County EMS 150.9950 MHz, P25, NAC 101.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Upshur County channels that also cover Bettie

Fire Dispatch

Fire Dispatch frequencies for Upshur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Upshur County FireESD #1 Dispatch155.3025
In 153.8900
NAC 349P25WSCK369
Upshur County FireESD #1 Dispatch (transitional)155.3025
In 153.8900
186.2 PLFMNWSCK369

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Upshur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harmony Consolidated Fire DepartmentHarmony Consolidated Fire Department – Tactical Channel155.6775
In 154.1750
331 DPLFMNWPGW436

EMS Dispatch

EMS Dispatch frequencies for Upshur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Upshur County EMSUpshur County EMS – Dispatch (Digital)150.9950
In 159.0150
NAC 101P25WQLN530

Nearest trunked radio sites

Distances are measured from the center of Bettie.

Gilmer · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 31 (hex 1F) · NAC 1A1 · about 9 mi away
Control 771.98125, 772.45625
Voice 770.11875, 771.38125, 771.73125
Mount Pleasant · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 47 (hex 2F) · about 23 mi away
Control 770.51875, 770.80625
Voice 769.26875, 770.03125, 771.05625
Winona · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 37 (hex 25) · NAC 1A0 · about 25 mi away
Control 852.9875, 853.9875
Voice 851.1375, 851.45, 851.6875, 851.95, 852.55
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bettie?

We do not have a fire dispatch channel listed specifically for Bettie. The county-level fire dispatch channels in the same county: Upshur County Fire 155.3025 MHz, P25, NAC 349.

What frequency does EMS or the ambulance service use in Bettie?

We do not have a EMS dispatch channel listed specifically for Bettie. The county-level EMS dispatch channels in the same county: Upshur County EMS 150.9950 MHz, P25, NAC 101.

What scanner do I need to listen to fire and EMS in Bettie?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bettie?

For Bettie, start with the Gilmer site of Texas Wide Area Radio Network (TxWARN). Its control channels are 771.98125, 772.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.