Skip to content

Pittsburg Fire and EMS Frequencies

Pittsburg in Camp County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Mount Pleasant (Texas Wide Area Radio Network (TxWARN)), about 12 miles away.

About Pittsburg Fire and EMS Frequencies

Quick answer: Fire dispatch for Pittsburg: Pittsburg Fire 154.3400 MHz, narrow FM, 225.7 PL. County-level ems dispatch that covers Pittsburg: Camp County EMS 150.9950 MHz, P25, NAC 101.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Pittsburg conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pittsburg
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pittsburg FireVolunteer Fire Department154.3400
In 158.9550
225.7 PLFMNKQG765

Camp County channels that also cover Pittsburg

EMS Dispatch

EMS Dispatch frequencies for Camp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Camp County EMSCamp County EMS – Dispatch150.9950
In 159.0150
NAC 101P25WQLN530

Hospitals & Medical

Hospitals & Medical frequencies for Camp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Camp County HospitalEMS to ETMC Pittsburgh E.R.155.3400173.8 PLFMNWNJS416

Nearest trunked radio sites

Distances are measured from the center of Pittsburg.

Mount Pleasant · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 47 (hex 2F) · about 12 mi away
Control 770.51875, 770.80625
Voice 769.26875, 770.03125, 771.05625
Gilmer · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 31 (hex 1F) · NAC 1A1 · about 15 mi away
Control 771.98125, 772.45625
Voice 770.11875, 771.38125, 771.73125
Winona · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 37 (hex 25) · NAC 1A0 · about 37 mi away
Control 852.9875, 853.9875
Voice 851.1375, 851.45, 851.6875, 851.95, 852.55
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pittsburg?

Fire dispatch channels listed for Pittsburg: Pittsburg Fire 154.3400 MHz, narrow FM, 225.7 PL.

What frequency does EMS or the ambulance service use in Pittsburg?

We do not have a EMS dispatch channel listed specifically for Pittsburg. The county-level EMS dispatch channels in the same county: Camp County EMS 150.9950 MHz, P25, NAC 101.

What scanner do I need to listen to fire and EMS in Pittsburg?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Pittsburg?

For Pittsburg, start with the Mount Pleasant site of Texas Wide Area Radio Network (TxWARN). Its control channels are 770.51875, 770.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pittsburg fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Pittsburg are marked encrypted.