Skip to content

Gilmer Fire and EMS Frequencies

Gilmer in Upshur County, Texas has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Gilmer (Texas Wide Area Radio Network (TxWARN)), about 6 miles away.

About Gilmer Fire and EMS Frequencies

Quick answer: Fire dispatch for Gilmer: Gilmer Fire 158.7450 MHz, narrow FM, 243 DPL. County-level ems dispatch that covers Gilmer: Upshur County EMS 150.9950 MHz, P25, NAC 101.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Gilmer conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Gilmer
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gilmer FireGilmer Fire – Dispatch158.7450
In 153.9350
243 DPLFMNWPCP685

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gilmer
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gilmer FireGilmer Fire Ground155.7900
In 154.8900
162.2 PLFMNKNAK320

Upshur County channels that also cover Gilmer

Fire Dispatch

Fire Dispatch frequencies for Upshur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Upshur County FireESD #1 Dispatch155.3025
In 153.8900
NAC 349P25WSCK369
Upshur County FireESD #1 Dispatch (transitional)155.3025
In 153.8900
186.2 PLFMNWSCK369

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Upshur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harmony Consolidated Fire DepartmentHarmony Consolidated Fire Department – Tactical Channel155.6775
In 154.1750
331 DPLFMNWPGW436

EMS Dispatch

EMS Dispatch frequencies for Upshur County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Upshur County EMSUpshur County EMS – Dispatch (Digital)150.9950
In 159.0150
NAC 101P25WQLN530

Nearest trunked radio sites

Distances are measured from the center of Gilmer.

Gilmer · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 31 (hex 1F) · NAC 1A1 · about 6 mi away
Control 771.98125, 772.45625
Voice 770.11875, 771.38125, 771.73125
Winona · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 37 (hex 25) · NAC 1A0 · about 19 mi away
Control 852.9875, 853.9875
Voice 851.1375, 851.45, 851.6875, 851.95, 852.55
Longview · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 42 (hex 2A) · NAC 1A0 · about 20 mi away
Control 858.7625, 858.9375, 859.7625, 859.9375
Voice 854.2875, 854.7125, 855.2125, 856.7625, 857.7625, 857.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gilmer?

Fire dispatch channels listed for Gilmer: Gilmer Fire 158.7450 MHz, narrow FM, 243 DPL.

What frequency does EMS or the ambulance service use in Gilmer?

We do not have a EMS dispatch channel listed specifically for Gilmer. The county-level EMS dispatch channels in the same county: Upshur County EMS 150.9950 MHz, P25, NAC 101.

What scanner do I need to listen to fire and EMS in Gilmer?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Gilmer?

For Gilmer, start with the Gilmer site of Texas Wide Area Radio Network (TxWARN). Its control channels are 771.98125, 772.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Gilmer fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Gilmer are marked encrypted.