About Big Sandy Fire and EMS Frequencies
Quick answer: Fire dispatch for Big Sandy: Big Sandy Fire 154.3100 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Big Sandy: Upshur County EMS 150.9950 MHz, P25, NAC 101.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Big Sandy conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Sandy Fire | Fire Primary | 154.3100 In 153.9500 | 186.2 PL | FMN | WNWT884 |
Upshur County channels that also cover Big Sandy
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Upshur County Fire | ESD #1 Dispatch | 155.3025 In 153.8900 | NAC 349 | P25 | WSCK369 |
| Upshur County Fire | ESD #1 Dispatch (transitional) | 155.3025 In 153.8900 | 186.2 PL | FMN | WSCK369 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harmony Consolidated Fire Department | Harmony Consolidated Fire Department – Tactical Channel | 155.6775 In 154.1750 | 331 DPL | FMN | WPGW436 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Upshur County EMS | Upshur County EMS – Dispatch (Digital) | 150.9950 In 159.0150 | NAC 101 | P25 | WQLN530 |
Nearest trunked radio sites
Distances are measured from the center of Big Sandy.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Big Sandy?
Fire dispatch channels listed for Big Sandy: Big Sandy Fire 154.3100 MHz, narrow FM, 186.2 PL.
What frequency does EMS or the ambulance service use in Big Sandy?
We do not have a EMS dispatch channel listed specifically for Big Sandy. The county-level EMS dispatch channels in the same county: Upshur County EMS 150.9950 MHz, P25, NAC 101.
What scanner do I need to listen to fire and EMS in Big Sandy?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Big Sandy?
For Big Sandy, start with the Winona site of Texas Wide Area Radio Network (TxWARN). Its control channels are 852.9875, 853.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Big Sandy fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Big Sandy are marked encrypted.