Skip to content

Franklin Fire and EMS Frequencies

Franklin in Robertson County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Franklin (Texas Wide Area Radio Network (TxWARN)), about 1 miles away.

About Franklin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Franklin: Robertson County Fire 154.3175 MHz, P25, NAC 411. Trunked: Texas Wide Area Radio Network (TxWARN), for example Robertson County Fire talkgroup 4130 (hex 1022).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin, start with the Franklin site of Texas Wide Area Radio Network (TxWARN), about 1 miles away. Its control channels: 770.69375, 773.03125 MHz.

Data updated .

Franklin conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Franklin
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin FireFranklin Fire – Fire Ground (includes Easterly)154.2350141.3 PLFMNKNAR915

Robertson County channels that also cover Franklin

Fire Dispatch

Fire Dispatch frequencies for Robertson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Robertson County FireFire/EMS Primary154.3175
In 159.3900
NAC 411P25WQJD362
Robertson County FireFire/EMS Dispatch155.2500
In 159.0450
411 DPLFMNWPQK535

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Robertson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Robertson County FireFire/EMS Secondary154.9650
In 159.4650
NAC 411P25WQJD362

Texas Wide Area Radio Network (TxWARN)

Texas Wide Area Radio Network (TxWARN) talkgroups
AgencyDescriptionTalkgroupHexMode
Robertson County FireFire EMS Dispatch41301022D
Robertson County FireFire EMS Response41311023D
Robertson County FireFire EMS Response41321024D

Nearest trunked radio sites

Distances are measured from the center of Franklin.

Franklin · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 59 (hex 3B) · about 1 mi away
Control 770.69375, 773.03125
North Brazos · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 40 (hex 28) · NAC 1A1 · about 13 mi away
Control 769.11875, 771.24375
Voice 771.76875, 772.24375, 772.85625, 774.14375
Bryan · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 21 (hex 15) · NAC 1A1 · about 25 mi away
Control 773.14375, 774.39375
Voice 769.31875, 769.86875, 770.51875, 770.85625, 771.89375, 772.80625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Franklin?

We do not have a fire dispatch channel listed specifically for Franklin. The county-level fire dispatch channels in the same county: Robertson County Fire 154.3175 MHz, P25, NAC 411.

Do fire departments and EMS use a trunked radio system in Franklin?

Yes. The county-level systems that cover Franklin are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Franklin?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Franklin?

For Franklin, start with the Franklin site of Texas Wide Area Radio Network (TxWARN). Its control channels are 770.69375, 773.03125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Franklin fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Franklin are marked encrypted.