About Kurten Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kurten: Brazos County Fire 155.9400 MHz, narrow FM, 141.3 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Brazos County Fire talkgroup 3861 (hex f15).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 12 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kurten, start with the North Brazos site of Texas Wide Area Radio Network (TxWARN), about 8 miles away. Its control channels: 769.11875, 771.24375 MHz.
Data updated .
Brazos County channels that also cover Kurten
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brazos County Fire | Brazos County Fire – Dispatch Patched to TG 3861 P25 | 155.9400 In 153.9800 | 141.3 PL | FMN | WQAB533 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brazos County Fire | Brazos County Fire – Fire Ground | 851.6250 | CSQ | FMN | WPJK435 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Brazos County Fire | Brazos County Fire – Dispatch (Simulcast with 155.940) | 3861 | f15 | D |
| Brazos County Fire | Brazos County Fire – Tactical Channel | 3862 | f16 | D |
| Brazos County Fire | Brazos County Fire – Tactical Channel | 3863 | f17 | D |
| Brazos County Fire | Brazos County Fire – Tactical Channel | 3864 | f18 | D |
| Brazos County Fire | Brazos County Fire – Tactical Channel | 3865 | f19 | D |
| Brazos County Fire | Non-Emergency Operations (NEO) | 3866 | f1a | D |
| Brazos Hospitals | Scott and White Hospital College Station | 10 | a | D |
| Brazos Hospitals | St. Joseph Hospital Bryan | 3961 | f79 | D |
| Brazos Hospitals | St. Joseph Express ER | 3962 | f7a | D |
| Brazos Hospitals | St. Joseph Hospital College Station | 3963 | f7b | D |
| Brazos Hospitals | Physicians Centre Hospital Bryan | 3964 | f7c | D |
| Brazos Hospitals | EMS to Hospitals | 3966 | f7e | D |
Nearest trunked radio sites
Distances are measured from the center of Kurten.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kurten?
We do not have a fire dispatch channel listed specifically for Kurten. The county-level fire dispatch channels in the same county: Brazos County Fire 155.9400 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Kurten?
Yes. The county-level systems that cover Kurten are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 12 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kurten?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kurten?
For Kurten, start with the North Brazos site of Texas Wide Area Radio Network (TxWARN). Its control channels are 769.11875, 771.24375 MHz. Program a control channel first; the scanner finds the voice channels from it.