Normangee also extends into Leon County.
About Normangee Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Normangee: Madison County Fire 151.1000 MHz, narrow FM, 132 DPL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Madison County Fire talkgroup 1870 (hex 74e).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Normangee, start with the Madisonville site of Texas Wide Area Radio Network (TxWARN), about 13 miles away. Its control channels: 772.83125, 773.38125 MHz.
Data updated .
Madison County channels that also cover Normangee
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Madison County Fire | Fire and EMS Dispatch | 151.1000 In 159.0600 | 132 DPL | FMN | WPTT350 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Madison County Fire | Madison/Leon Fire Repeater | 154.3850 In 153.8900 | 141.3 PL | FMN | WNMJ291 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Madison County Fire | Madison County Fire – Dispatch | 1870 | 74e | D |
| Madison County Fire | Madison County Fire – Fire Ground | 1871 | 74f | D |
| Madison County Fire | Madison County Fire – Fire Ground | 1873 | 751 | D |
| Madison County EMS | Madison County EMS – Dispatch | 1869 | 74d | D |
Nearest trunked radio sites
Distances are measured from the center of Normangee.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Normangee?
We do not have a fire dispatch channel listed specifically for Normangee. The county-level fire dispatch channels in the same county: Madison County Fire 151.1000 MHz, narrow FM, 132 DPL.
Do fire departments and EMS use a trunked radio system in Normangee?
Yes. The county-level systems that cover Normangee are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Normangee?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Normangee?
For Normangee, start with the Madisonville site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.83125, 773.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.