About Midway Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Midway: Madison County Fire 151.1000 MHz, narrow FM, 132 DPL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Midway Fire talkgroup 1878 (hex 756).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 1 talkgroup; Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Midway, start with the Midway site of Texas Wide Area Radio Network (TxWARN), about 4 miles away. Its control channels: 773.65625, 774.48125 MHz.
Data updated .
Midway trunked talkgroups
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Midway Fire | Midway Volunteer Fire Department | 1878 | 756 | D |
Madison County channels that also cover Midway
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Madison County Fire | Fire and EMS Dispatch | 151.1000 In 159.0600 | 132 DPL | FMN | WPTT350 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Madison County Fire | Madison/Leon Fire Repeater | 154.3850 In 153.8900 | 141.3 PL | FMN | WNMJ291 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Madison County Fire | Madison County Fire – Dispatch | 1870 | 74e | D |
| Madison County Fire | Madison County Fire – Fire Ground | 1871 | 74f | D |
| Madison County Fire | Madison County Fire – Fire Ground | 1873 | 751 | D |
| Madison County EMS | Madison County EMS – Dispatch | 1869 | 74d | D |
Nearest trunked radio sites
Distances are measured from the center of Midway.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Midway?
We do not have a fire dispatch channel listed specifically for Midway. The county-level fire dispatch channels in the same county: Madison County Fire 151.1000 MHz, narrow FM, 132 DPL.
Do fire departments and EMS use a trunked radio system in Midway?
Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Midway?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Midway?
For Midway, start with the Midway site of Texas Wide Area Radio Network (TxWARN). Its control channels are 773.65625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Midway fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Midway are marked encrypted.