Skip to content

Riverside Fire and EMS Frequencies

Riverside in Walker County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is East Walker County (Texas Wide Area Radio Network (TxWARN)), about 11 miles away.

About Riverside Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Riverside: Walker County Fire 154.2050 MHz, narrow FM, 632 DPL. County-level ems dispatch that covers Riverside: Walker County EMS 155.2650 MHz, narrow FM, 100.0 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Walker Fire/EMS talkgroup 1124 (hex 464).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Riverside, start with the East Walker County site of Texas Wide Area Radio Network (TxWARN), about 11 miles away. Its control channels: 853.2875, 853.9 MHz.

Data updated .

Riverside conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Riverside
AgencyDescriptionFrequency (MHz)ToneModeFCC
Riverside VFD FireRiverside Volunteer Fire Department Fire – Tactical Channel /Talk154.7625
In 158.9425
100.0 PLFMNWQFC446

Walker County channels that also cover Riverside

Fire Dispatch

Fire Dispatch frequencies for Walker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walker County FireWalker County Fire – Dispatch (all departments) – Linked to TxWARN TG 1124154.2050
In 158.8350
632 DPLFMNKLV902

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Walker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crabbs Prairie VFD FireCrabbs Prairie Volunteer Fire Department Fire – Fire Ground154.4300FMNWPEK875
Walker County FireWalker County Fire – Fire Ground (all departments)154.2050100.0 PLFMNKLV902

EMS Dispatch

EMS Dispatch frequencies for Walker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walker County EMSEMS Paging (Primary on TxWARN TG 1120)155.2650
In 150.7750
100.0 PLFMNWXY253

Texas Wide Area Radio Network (TxWARN)

Texas Wide Area Radio Network (TxWARN) talkgroups
AgencyDescriptionTalkgroupHexMode
Walker Fire/EMSFire 1 Operations1124464D
Walker Fire/EMSTactical Fireground, possibly linked to Texas Fire1126466D
Walker Fire/EMSChannel 1 Primary (patched with 155.265 MHz)1120460D
Walker Fire/EMSWalker Fire/EMS – Tactical Channel1122462D

Nearest trunked radio sites

Distances are measured from the center of Riverside.

East Walker County · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 44 (hex 2C) · NAC 1A0 · about 11 mi away
Control 853.2875, 853.9
Voice 856.2125, 857.2125, 858.2125
Groveton · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 35 (hex 23) · about 19 mi away
Control 772.91875, 774.73125
Voice 770.28125, 771.08125, 772.18125, 772.50625
West Walker County · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 45 (hex 2D) · NAC 1A2 · about 23 mi away
Control 852.15, 852.4
Voice 851.4, 851.65, 851.7, 852.05
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Riverside?

We do not have a fire dispatch channel listed specifically for Riverside. The county-level fire dispatch channels in the same county: Walker County Fire 154.2050 MHz, narrow FM, 632 DPL.

What frequency does EMS or the ambulance service use in Riverside?

We do not have a EMS dispatch channel listed specifically for Riverside. The county-level EMS dispatch channels in the same county: Walker County EMS 155.2650 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Riverside?

Yes. The county-level systems that cover Riverside are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Riverside?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Riverside?

For Riverside, start with the East Walker County site of Texas Wide Area Radio Network (TxWARN). Its control channels are 853.2875, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Riverside fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Riverside are marked encrypted.