About Miami Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Miami: Roberts County Fire 154.7250 MHz, P25, NAC 61F. County-level ems dispatch that covers Miami: Roberts County EMS 154.2125 MHz, narrow FM, 466 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Roberts County channels that also cover Miami
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Roberts County Fire | Roberts County Fire – Dispatch (South PANCOM) | 154.7250 In 155.8500 | NAC 61F | P25 | WQGT208 |
| Roberts County Fire | Roberts County Fire – Dispatch (South PANCOM) | 154.7250 In 155.8500 | 466 DPL | FMN | WQGT208 |
| Roberts County Fire | Roberts County Fire – Dispatch (North PANCOM) | 154.9950 In 155.8500 | 466 DPL | FMN | WQGT208 |
| Roberts County Fire | Roberts County Fire – Dispatch (North PANCOM) | 154.9950 In 155.8500 | NAC 61F | P25 | WQGT208 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sweetwater Creek Fire Association | Repeater (Miami) | 159.3600 In 151.1900 | 203.5 PL | FMN | WPAE634 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Roberts County EMS | Roberts County EMS – Dispatch (North PANCOM) | 154.2125 In 151.4450 | 466 DPL | FMN | WQGT208 |
| Roberts County EMS | Roberts County EMS – Dispatch (North PANCOM) | 154.2125 In 151.4450 | NAC 61F | P25 | WQGT208 |
| Roberts County EMS | Roberts County EMS – Dispatch (South PANCOM) | 155.5425 In 151.4450 | 466 DPL | FMN | WQGT208 |
| Roberts County EMS | Roberts County EMS – Dispatch (South PANCOM) | 155.5425 In 151.4450 | NAC 61F | P25 | WQGT208 |
Nearest trunked radio sites
Distances are measured from the center of Miami.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Miami?
We do not have a fire dispatch channel listed specifically for Miami. The county-level fire dispatch channels in the same county: Roberts County Fire 154.7250 MHz, P25, NAC 61F.
What frequency does EMS or the ambulance service use in Miami?
We do not have a EMS dispatch channel listed specifically for Miami. The county-level EMS dispatch channels in the same county: Roberts County EMS 154.2125 MHz, narrow FM, 466 DPL.
What scanner do I need to listen to fire and EMS in Miami?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Miami?
For Miami, start with the Borger site of Amarillo Radio Communications System (ARCS). Its control channels are 772.65625, 773.45625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.