Skip to content

Glazier Fire and EMS Frequencies

We do not have frequencies listed specifically for Glazier in Hemphill County, Texas yet. Countywide channels for Hemphill County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Borger (Amarillo Radio Communications System (ARCS)), about 61 miles away.

About Glazier Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Glazier: Hemphill County Fire 155.2650 MHz, narrow FM, 205 DPL. County-level ems dispatch that covers Glazier: Hemphill County EMS 154.4450 MHz, narrow FM, 205 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Hemphill County channels that also cover Glazier

Fire Dispatch

Fire Dispatch frequencies for Hemphill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hemphill County FireHemphill County Fire – Dispatch (PANCOM)155.2650
In 154.0700
205 DPLFMNWQGM890
Hemphill County FireHemphill County Fire – Dispatch (PANCOM)155.2650
In 154.0700
NAC 61FP25WQGM890

EMS Dispatch

EMS Dispatch frequencies for Hemphill County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hemphill County EMSHemphill County EMS – Dispatch (PANCOM)154.4450
In 158.9475
205 DPLFMNWQGM890
Hemphill County EMSHemphill County EMS – Dispatch (PANCOM)154.4450
In 158.9475
NAC 61FP25WQGM890

Nearest trunked radio sites

Distances are measured from the center of Glazier.

Borger · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 4 (hex 4) · NAC 950 · about 61 mi away
Control 772.65625, 773.45625, 774.48125
Stinnett · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 5 (hex 5) · NAC 950 · about 61 mi away
Control 770.43125, 773.05625, 774.09375
Voice 769.68125
Canadian River · Amarillo Radio Communications System (ARCS)
RFSS 1 · Site 2 (hex 2) · NAC 952 · about 98 mi away
Control 774.13125, 774.38125, 774.70625
Voice 773.88125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Glazier?

We do not have a fire dispatch channel listed specifically for Glazier. The county-level fire dispatch channels in the same county: Hemphill County Fire 155.2650 MHz, narrow FM, 205 DPL.

What frequency does EMS or the ambulance service use in Glazier?

We do not have a EMS dispatch channel listed specifically for Glazier. The county-level EMS dispatch channels in the same county: Hemphill County EMS 154.4450 MHz, narrow FM, 205 DPL.

What scanner do I need to listen to fire and EMS in Glazier?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Glazier?

For Glazier, start with the Borger site of Amarillo Radio Communications System (ARCS). Its control channels are 772.65625, 773.45625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.