About Follett Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Follett: Lipscomb County Fire 154.1450 MHz, narrow FM, 065 DPL. County-level ems dispatch that covers Follett: Lipscomb County EMS 158.8050 MHz, narrow FM, 065 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Lipscomb County channels that also cover Follett
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lipscomb County Fire | Lipscomb County Fire – Dispatch (PANCOM) | 154.1450 In 153.7700 | 065 DPL | FMN | WQGM890 |
| Lipscomb County Fire | Lipscomb County Fire – Dispatch (PANCOM) | 154.1450 In 153.7700 | NAC 61F | P25 | WQGM890 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lipscomb County EMS | Lipscomb County EMS – Dispatch (PANCOM) | 158.8050 In 153.7925 | 065 DPL | FMN | WQGM890 |
| Lipscomb County EMS | Lipscomb County EMS – Dispatch (PANCOM) | 158.8050 In 153.7925 | NAC 61F | P25 | WQGM890 |
Nearest trunked radio sites
Distances are measured from the center of Follett.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Follett?
We do not have a fire dispatch channel listed specifically for Follett. The county-level fire dispatch channels in the same county: Lipscomb County Fire 154.1450 MHz, narrow FM, 065 DPL.
What frequency does EMS or the ambulance service use in Follett?
We do not have a EMS dispatch channel listed specifically for Follett. The county-level EMS dispatch channels in the same county: Lipscomb County EMS 158.8050 MHz, narrow FM, 065 DPL.
What scanner do I need to listen to fire and EMS in Follett?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Follett?
For Follett, start with the Borger site of Amarillo Radio Communications System (ARCS). Its control channels are 772.65625, 773.45625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.