About White Deer Fire and EMS Frequencies
Quick answer: Fire dispatch for White Deer: White Deer Fire 155.0850 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers White Deer: Carson County EMS 158.7975 MHz, narrow FM, 132 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
White Deer conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| White Deer Fire | White Deer Fire – Dispatch | 155.0850 In 159.3225 | 146.2 PL | FMN | KNNG277 |
Carson County channels that also cover White Deer
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carson County Fire | Carson County Fire – Dispatch (PANCOM) | 154.3850 In 153.9500 | NAC 61F | P25 | WQGW360 |
| Carson County Fire | Carson County Fire – Dispatch (PANCOM) | 154.3850 In 153.9500 | 132 DPL | FMN | WQGW360 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carson County EMS | Carson County EMS – Dispatch (PANCOM) | 158.7975 In 153.9800 | 132 DPL | FMN | WQGW360 |
| Carson County EMS | Carson County EMS – Dispatch (PANCOM) | 158.7975 In 153.9800 | NAC 61F | P25 | WQGW360 |
Nearest trunked radio sites
Distances are measured from the center of White Deer.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in White Deer?
Fire dispatch channels listed for White Deer: White Deer Fire 155.0850 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in White Deer?
We do not have a EMS dispatch channel listed specifically for White Deer. The county-level EMS dispatch channels in the same county: Carson County EMS 158.7975 MHz, narrow FM, 132 DPL.
What scanner do I need to listen to fire and EMS in White Deer?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in White Deer?
For White Deer, start with the Borger site of Amarillo Radio Communications System (ARCS). Its control channels are 772.65625, 773.45625, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are White Deer fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for White Deer are marked encrypted.