About Claude Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Claude: Armstrong County Fire 154.2425 MHz, narrow FM, 627 DPL; Wayside Emergency Team 453.1250 MHz, FM, 103.5 PL. County-level ems dispatch that covers Claude: Armstrong County EMS 155.1975 MHz, narrow FM, 627 DPL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Armstrong County channels that also cover Claude
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Armstrong County Fire | Armstrong County Fire – Dispatch (South PANCOM) | 154.2425 In 151.2275 | 627 DPL | FMN | WQGW360 |
| Armstrong County Fire | Armstrong County Fire – Dispatch (South PANCOM) | 154.2425 In 151.2275 | NAC 61F | P25 | WQGW360 |
| Armstrong County Fire | Armstrong County Fire – Dispatch (North PANCOM) | 155.2125 In 151.2275 | 627 DPL | FMN | WQGW360 |
| Armstrong County Fire | Armstrong County Fire – Dispatch (North PANCOM) | 155.2125 In 151.2275 | NAC 61F | P25 | WQGW360 |
| Wayside Emergency Team | Wayside Fire and Rescue | 453.1250 In 458.1250 | 103.5 PL | FM | WPJJ851 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Armstrong County EMS | Armstrong County EMS – Dispatch (South PANCOM) | 155.1975 In 153.9425 | 627 DPL | FMN | WQGW360 |
| Armstrong County EMS | Armstrong County EMS – Dispatch (South PANCOM) | 155.1975 In 153.9425 | NAC 61F | P25 | WQGW360 |
| Armstrong County EMS | Armstrong County EMS – Dispatch (North PANCOM) | 158.7825 In 153.9425 | 627 DPL | FMN | WQGW360 |
| Armstrong County EMS | Armstrong County EMS – Dispatch (North PANCOM) | 158.7825 In 153.9425 | NAC 61F | P25 | WQGW360 |
Nearest trunked radio sites
Distances are measured from the center of Claude.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Claude?
We do not have a fire dispatch channel listed specifically for Claude. The county-level fire dispatch channels in the same county: Armstrong County Fire 154.2425 MHz, narrow FM, 627 DPL; Wayside Emergency Team 453.1250 MHz, FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Claude?
We do not have a EMS dispatch channel listed specifically for Claude. The county-level EMS dispatch channels in the same county: Armstrong County EMS 155.1975 MHz, narrow FM, 627 DPL.
What scanner do I need to listen to fire and EMS in Claude?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Claude?
For Claude, start with the Potter County site of Amarillo Radio Communications System (ARCS). Its control channels are 853.1875, 853.4375, 853.6875, 853.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.